GYPSUM PLASTER MACHINE APPLIED
MAKINE SIVA is
gypsum-based, ready-to-use
spray plaster.
MAKINE SIVA
can be directly applied to
brick, concrete,
aerated-concrete, etc.
One layer is enough for the
surface to be painted.
There is no need for SATEN
finishing plaster.
It has high surface hardness
and a brilliant appearance.
It is a non-combustible material.
The water in its structure helps to
retard fire.
Because it is a breathable
material, MAKINE SIVA
leads to a healthier environment
by stabilizing humidity in the air.
Before application, clean away dust and any substances which might prevent adherence to the surface.
Mix MAKINE SIVA in a plastering machine and spray it between the laths. After spraying, smooth the surfaces using a straight edge.
Pre-smooth the surface with a spatula. Wet the surface with a sponge.
Approximately 10 minutes later, polish with a steel trowel to get a brilliant, high-gloss surface.
Approximately 10 minutes later, polish with a steel trowel to get a brilliant, high-gloss surface.
Never mix MAKINE SIVA with any other product or material.
MAKINE SIVA should be applied between 8-30 mm thick.
Do not use MAKINE SIVA in temperatures below +5°C.
Dry and hot surfaces must be moistened before applying MAKINE SIVA.
Keep the plastering machine and all application tools clean.
Bags must be stored in a dry place and must not be stacked more than 20 bags high. Do not allow bags to be in contact with the ground or with moisture.
Use MAKINE SIVA within 1 year of the date of manufacture.
Poor storage conditions or exceeding the shelf-life may cause the physical properties of MAKINE SIVA to deteriorate.
Water/Plaster ratio ...... 5– 6 L of water to 10 kg MAKINE SIVA
Setting time starts .......................................... > 50 minutes
Final setting time ............................................ 180 minutes
Coverage ................ 10-11 kg/m2 for each 1 cm thickness
Compressive strength (min.) ................... 25 kgf/cm2 (4x4 block)
Flexural strength (min.) ............. 10 kgf/cm2 (4x4x16 block)
Pass 1000 micron sieve .............................................. %100
Pass 150 micron sieve (min.) .............................. %60
Bulk density (powder) ................................ 800-850 kg/m3
Dry density .............................................. 1150-1250 kg/m3
Thermal conductivity ......................................... 0,43 W/mK
Fire classification .............................................................. A1
Reference standard ........................... TDS-31377-2008
Type ............................... B4/20/2 Light Weight Gypsum Projection Plaster
Type ...................................... Polypropylene laminated bags
Weight ........................................................................... 30 kg±%1
PROTECT FROM MOISTURE
FIRE RESISTANCE: A1
SOUND INSULATION: NPD
THERMAL INSULATION: NPD
MADE IN TURKMENISTAN
EASY TO USE
BASE TEMPERATURE
FOR INTERIOR USE
USAGE TIME 30 MINUTES
THICKNESS OF APPLICATION 5-40 MM.